Smiths of the Forest of Dean Ltd

Rainharvesting System

This is a complete state-of-the-art rain harvesting system capturing your roof rainfall.  Made by quality UK
manufacturers.  It is easy to install with high performance capturing of water to combat hose pipe bans - all year
round.  The system looks good is low maintenance and recyclable.  All pipework to your drain will be included in
the price, within reason.  Delivery is free to many postcode areas - ring to see if you are in one of them. 

This is how it works.
1  Submersible Pump.  The submersible pump is located in the tank.  It is self-contained for easy installation,  This high powered pump provides a high flow over a long hose length.  Comes with a remote On/Off switch.			2  Filter Assembly. Comes with a lift-out 0.2mm stainless steel filter for improved water quality.  It is self-cleaning with low maintenance.  Because it is located within the tank it saves space and is easier to install and access.    Comes with an overflow skimmer and U-bend overflow to improve water quality.  This tank will provide a 90% water yield.
3 Calmed outlet.   this minimises the disturbance of settled matter which improves water quality.			4  The Telescopic Turret The adjustable height minimises the installation depth and allows a neat flush finish with the ground
High impact strength at low temperatures			Lightweight, easy to handle
High level of impact resistance			Manufactured in tough polyethylene
Leak proof, single piece moulding			Corrosion resistant, low maintenance, recyclable
Select your Complete Rain Harvesting System.  Here you can compare sizes.
Litres /  Gallons	Tank	Height	Diameter
2728 /    600	Rain Havesting System	2.52m/8'3"	1.86m/6'1"
3800 /    836	Rain Havesting System	2.76m/9'1"	2.06m/6'9"
4546 / 1000	Rain Havesting System	2.89m/9'6"	2.18m/7'2"
6000 / 1320	Rain Havesting System	3.12m/10'3"	2.38m/7'10"
Comes with:	Submersible pump,  filter assembly, calmed inlet, guided suction pipe, telescopic turret, IP rated switch, suction line and free delivery to many postcode areas.  Opportunity to customise to your specific requirements.
Material:	New.  Rotationally moulded in tough polyethylene by our UK manufacturer.  It offers a high level of impact resistance with high impact strength at low temperatures.
Certifications:	Manufacturer's warranty on all tanks (subject to conditions)
Availability:	We do not carry stocks of this item, but the lead time is short.  Ring 01594 833308 to check.
Optional extras:	Opportunity to customise to your specific requirements.
Prices and more information:	Give us a call on 01594 833308 and speak to an experienced adviser.  Price List available.
Notes:	Ring should you wish to clarify the help you need regarding installation.
Installation: All tanks must be installed in accordance with the manufacturer's guidelines.  The total base must be fully supported - if in doubt contact the manufacturer, the Environment Agency or give us a ring.  Don't forget to check the manufacturer's warranty and register your tank if needs be.   Capacities and dimensions approximate.
You may also like to see:
Rainsavers	Oil Tanks	Conical Tanks	IBC Tanks	Drums and Barrels

Rain Harvesting System

Stocks:
Not a stock item.
Short lead time

Delivery:
We can deliver  this system free to  many postcode areas.

Need prices and information?
Ring and talk to an
experienced member
of staff.

Ready to buy?
Call in or phone
your order through.

Tel:01594 833308

Email us:
Send email.

Call in:
Address and location

Our stand at NEC Birmingham